ARGOX X-3200 PDF

XE. XZE. XE. XZE. Industrial Label Printer | X-Series. dpi. dpi. Trusted Dependability, Quality Assured. Getting Started. Congratulations on choosing the Argox Xellent Series (X-Series) Enter Printer name (i.e. Argox X PPLB) and select “do not share this. ARGOX X is ideal for applications that require small labels or textile media. Provides greater productivity.

Counter-clockwise rotate the screw a half circle and test printing; observe whether the printing quality has been gradually improved or not; and stop the adjustment if the quality is improved. Making a Keyboard Form 1.

Argox X Manuals

Hold both buttons for about 3 seconds and release. If the problem persists, replace the print head. A label is printed. Do not operate the printer in an area where it might get wet. Making A Barcode Reader Form Printer Programming Language Z, Pplz Description Product Description The X industrial barcode printer features dpi printing for high quality text and graphics on fabric labels, safety labels and labels for small items such arggox jewelry.

Centronics Parallel Port For example, the first option of print modes is thermal transfer. FEED Press to show next parameter.

Close the top access door and turn on the printer or press the Argo button if the printer is already on. Delete by application software for those no longer in use.

Turn off the printer 2. To enable Cutter function, set by the LCD panel 30 Adjust Position of Label Sensor Function of the label sensor is to detect the gap, notch, or holes of labels, to help the printer for accurate print positions and label length.

Clean the print head as follows: Lead the ribbon through the print head module. Ethernet Module Status Indicators The indicators with two different colors help users understand status of Ethernet: The screens included for these steps are taken from Windows XP; steps in other versions of operation systems are similar.

Argox X-3200 Manuals

Print Head Pressure Lead the media through the print head module and under the paper sensor guide. Internal character sets standard 5 alpha-numeric fonts from 0.

If there are any items missing, please contact your local dealer. Risk of explosion if battery is replaced by an incorrect type.

In Dump mode, all characters will be printed in 2 columns: Make sure the peeler sensor is out of the ribbon path when installed.

Argox X |

Advanced Installation and Adjustment This chapter describes installation and adjustment procedure for X series industrial printers. Such proprietary information may not be used, reproduced, or disclosed to any other parties arhox any other purpose without the expressed written permission of Argox Information Co. Remove the top cover on both left and right sides.

Roll-feed, die-cut, continuous, fan-fold, tags, ticket in thermal paper or plain paper and fabric label. The language selection screen x-2300. Another way is to turn off printer power, and then restart printer.

Repeat Step 1; if the printing quality has not been gradually improved after five times, counterclockwise rotate five circles back to the original position and then proceed Step 3. Please contact your local Argox reseller if you need this cable.

Argox X-3200

Usb Interface Requirements If the test print appears as Figure B, remain the screw at the left of Ribbon Bracket fixed, and then loose the screw at the right, and gradually fine-tune upward, until the print quality gets improved. Troubleshooting Normally, if the printer is in not working properly, the “READY” LED blinks continuously, and printing and communication between the host and printer stops. Windows ServerR2,R2, and This section can be referred to, for X-Series to use transfer thermal printing.

Changing Settings From The Panel Cleaning the Media Compartment Clean the media compartment with a cotton bud that has been moistened with x-200 mild detergent. Pin 9 is reserved for KDU keyboard device unit Note: Printer Programming Language B, Pplb Unless changed via panel or command the parameter is saved even if you restart the printer.

Refer to aggox following examples. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.