DSC PC1500 INSTALLATION MANUAL PDF

Page 1. Page 2. Page 3. Page 4. Page 5. Page 6. Page 7. Page 8. Page 9. Page Page Page Page Page Page Page Page Page your installer instruct you on system operation and on which features have Your security system is made up of a DSC PC or PC control panel, one or from having to manually bypass interior zones each time they wish to arm. Read this manual carefully and have your installer instruct you on system Your security system is made up of a DSC PC or PC control panel, one or.

Comments to this Manuals Your Name.

DSC PC INSTRUCTION MANUAL Pdf Download.

Got it, continue to print. The entire manual should be carefully read. Do not wash the keypad with a wet cloth. Don’t show me this message again. The alarm memory will automatically be displayed when the system is disarmed See Disarming the System.

The smoke detectors may have been improperly installed Please Read Carefully or positioned. Enter a valid access code to silence the alarm. Don’t have an account? Page 4 Entry Delay Off Arming If you wish to arm your system and eliminate the entry delay, enter [ ][9] before your access code. Press [ ] to return to Ready. The metal cabinet contains the system electronics, fuses and stand-by battery. The following points should be observed.

Be sure to remove snow from exterior patio doors in winter; outdoor furniture or equipment should not block exits. The Master Code will be supplied to you by your installer.

dsx This manual contains information on. Light dusting with a barely damp cloth should remove normal accumulations of dust. An entry through any zone programmed as a delay zone will create an instant alarm. Page of 16 Go. Page 10 Maintenance With normal use, the system requires minimum maintenance. PcPc – rev8Pc – rev8.

Maintenance With normal use, the system requires minimum maintenance. Entry Delay Off Csc If you wish to arm your system and eliminate the entry delay, enter [ ][9] before your access code.

Page 3 Master Code The 4 digit Master Code is used to arm and disarm the security system, to program additional security codes and to change other system features. Memory Bypass Armed light will come ON indicating the system is armed. Printed in Canada R Page 8 [P] Panic Holding this key down for two seconds causes a steady tone on your siren or bell if your installer has programmed this key for audible operation.

Add to my manuals Add.

DSC PC1550 Installation Manual

Ready light ON – System is ready for arming. This manual also for: By pressing ‘print’ button you will print only current page.

To print the manual completely, please, download it. Enter text from picture: Master Code The 4 digit Master Code is used to arm and disarm the security system, to program additional security codes and to change other system features. The control panel will be mounted out of the way in a utility closet or in a basement.

Press [ pc15000 then [3] to display the zone which caused the alarm. Page 9 Ready light ON – System is ready for arming.

DSC PC1500 Instruction Manual

Smoke may not be able to reach the smoke detec- tors, such as when the fire is in a chimney, walls or roofs, mabual on Note to Installers the other side of closed doors. Changes or modifications not expressly approved by Mabual Security Controls Ltd. All keypad entries are made by pressing one key at a time. An auxiliary warning device is also activated if your installer has connected it to your system.